Upgrade your indoor lighting with NSL’s premium 3000K LED tape lights — available in both High Power and Low Power models. These high-performance LED strip lights deliver pixel-free, smooth illumination for residential and commercial applications, including cove lighting, cabinet lighting, and architectural features. Built for long-term reliability, each version offers excellent color accuracy (CRI 90+), high efficiency, and a 5-year warranty.
SL-ID-30K series tape light
SL-ID-30K Series Standard Features:
- Length: 20 feet
- Width: 0.31" (8mm)
- Cuttable: Every 2.19"
- Backing: 3M adhesive pre-applied
- Lead Length: 72"
- Color Temperature: 3000K (warm white)
- Color Accuracy: CRI 90+, SDCM <3, 1 BIN
- LED Density: 288 LEDs/m – seamless, pixel-free light
- Voltage: 24V DC
- IP Rating: IP40 (indoor use)
Low Power Specifications:
- Power Consumption: 1.46W per foot
- Light Output: 160 lumens per foot (110 lumens per watt)
High Power Features:
- Power Consumption: 2.93W per foot
- Light Output: 300 lumens per foot (102 lumens per watt)
Downloads
Products Brochure
Low Power Spec Sheet
High Power Spec Sheet
FAQ
Does this tape light require a driver?
Yes. This tape requires 24V DC so a power supply with enough capacity is required. See our driver selection here.
Is this tape light dimmable?
Yes. See our article about dimming tape lighting here.
Can this tape light be used ourdoors?
No. You can find outdoor rated tape light here.
Can multiple runs of tape light be run end-to-end?
Yes. This tape has a maximum run length of 40ft. For runs over 40 feet you'll need and amplifier and additional drivers. See our article about running multiple runs here.
Does this tape light get hot?
No. This tape is cool to the touch when installed properly.
Will the adhesive stick to bare wood?
No. NSL uses a high quality 3M adhesive but for long-term success a smooth nonporous mounting surface is required. Often times shelves and cabinets are constructed with wood that is coated with a laminate material that's compatible with adhesive, but if your application has a rough or porous surface then you should install NSL #SL-OD-EX-39 (these are 1 meter long extrusions) aluminum channel to hold the tape.